WELCOME TO THE OFFICIAL WEBSITE FOR THE DVJC

- Parts for Sale Classifieds -
Help - Login
Register

March 31, 2015 - 08:04
posted by : (aaron@dedicatedhomeservices.com)
Re.: D-type fiberglass body
Edited on 2015-03-31 8:37:39


D-type Jaguar fiberglass front and rear body panels to build a kit car or two bench seats for a man cave. email for more photos
$2500 OBO
I don't know the year or other details of which d-type the panels were patterned from. Take a look at the photos to see if any aficionados can tell me more. The front and rear clips are all I have.
My father was a jaguar enthusiast and acquired these in the early 70’s. He passed away a while ago so from what I can remember the story was a couple of jaguar guys got the opportunity to use an aluminum body racing d-type as a pattern for what was to be a kit car venture. They had limited time to do this and it was fast and dirty. My dad had fiberglass skills from working in a boat shop so they made a mold of the car in one night. You can see this in the pieces by masking tape lines covering the removable panel seams and rivets in other places. After making the molds the pulled one set of front and rear sections plus the doors to see how it went. They intended on refining the molds and doing bodywork as well as reinforcing them. The molds were apparently destroyed in a garage fire so my dad’s experimental parts were all that remained. I don't know what happened to the doors and lower quarter panels etc. but at least I managed to pull these sections out a collapsing barn. I assume someone can fabricate the remaining sections and make a kit car out of them and have it look halfway decent. Build a jaguar booth for a car themed diner. If nothing else, paint them up and hang them in a garage.
Local pickup 1 hour northwest of Milwaukee Wisconsin or I can crate them up and get them to a shipping terminal within 50 miles of 53035
Crating $200, 50 mile delivery to shipping terminal $100


March 30, 2015 - 02:23
posted by : (steve.veris@sbcglobal.net)
Re.: XK140 Trunk Badge & Chrome Trim Strip - OEM
Edited on 2015-03-31 12:35:28

OEM parts, badge flawless, trim strip very nice but looks like it has been re-chromed. Here is a link to more pictures:

https://www.flickr.com/photos/62775701@N06/sets/72157651245522130/

Steve Veris
XK140 Parts

March 30, 2015 - 02:12
posted by : (jbxk120@gmail.com)
series 2 e-type bonnet
i have all outer bonnet panels in good condition.$2000.00

jerry@jbxk120@gmail.com

March 28, 2015 - 04:58
posted by : (ehrlichd@yahoo.com)
XJS PARTS FOR SALE
- Complete fan cowl including both sides, electric fan motor and blade
- mechanical fan blade and almost new viscous coupling
- new viscous coupling in the box
- Mechanical fan bearing assy including the jockey pulley and all adjusters
- Bosch Alternator and Load Dump Module
- Convertible Frame with black canvas in decent shape, needs a new liner
- Convertible Boot Cover - black in very good condition
- Air pump and vacuum dump valve

Make me an offer. Pics available on request
All parts are from my 90 XJS 5.3 V12


Dave Ehrlich
Dumfries, VA
1990 XJS Classic Collection Convertible

March 24, 2015 - 03:59
posted by : (britspcars@gmail.com)
Re.: Complete XK140 FHC Interior Wood Set
Edited on 2015-03-24 16:04:40

Edited on 2015-03-24 16:04:07

Edited on 2015-03-24 16:03:19

Edited on 2015-03-24 16:00:19



Complete dash, center drawer, door caps, all molding, etc for a FHC car.
Completely as per original in all aspects, veneer book matched in correct places.
Of the highest possible quality.
REALLY sets of an already beautiful car, drawing endless compliments.
(Additional pictures and video available)

$2900


Video

March 20, 2015 - 07:45
posted by : (mrcrchadd@peoplepc.com)
Early S1 center "polka dot" dash
For sale is an original S1 dot pattern center dash aluminum.

It is in very good condition, has a few light scratches that can be carefully polished out, and one scratch above a switch hole that is a bit deeper. This one can be greatly minimized as well. Absolutely no denting and is more than appropriate for the driven car, since it is not a concours item

please email with questions


March 18, 2015 - 10:56
posted by : (d8501@aol.com)
XK-120 King Dick Rachet
Not banged up. Email for picture.

mark

March 17, 2015 - 02:31
posted by : (d8501@aol.com)
XK-120 Oil pump with pickup tube assembly
D179 & C2198 on pump. Used.



March 12, 2015 - 08:04
posted by : (ezscreen@gmail.com)
1973 E Coupe V-12 engine, transmission, bumpers, gauges & interior + +
I just purchased an unmolested car on eBay that I intend to make some major changes to. I will be removing all of the above + from the car. I would prefer selling the entire package of parts rather than individually. The car is claimed to have only 58k miles on it. Perhaps you've seen the car advertised there. I have pictures of the car if needed. Any buyers?

March 12, 2015 - 12:11
posted by : (caroleborgens@shaw.ca)
Complete Tool Pouch and Owneers Manuals
Edited on 2015-03-18 0:50:58

1989 XJ-S tool pouch with complete set of original tools in concours condition.

Leather Jaguar binder with Owners manual and other books, concours condition.

Together $300. Canadian.

Thanks for looking.

Carole Borgens
1990 XJ-S Convertible
604-857-1837

March 8, 2015 - 07:11
posted by : (d8501@aol.com)
XK-120/140 Mallory dual point Magna Spark distributor from 1950's
Mallory Model YCM. Type 278 C. No vacuum advance. Racing style, was placed into some D-types. With cap, points, rotor, cap seal. No shaft wobble. Saw little use. Drops right like a factory unit, slotted base on shaft end.


mark

March 8, 2015 - 06:55
posted by : (d8501@aol.com)
XK-120 Rear Bumpers, reproduction in alloy
Have 2 new rear bumpers, in alloy, reproductions, highly polished, look much like chrome.

mark

March 8, 2015 - 06:52
posted by : (d8501@aol.com)
Unstamped XK-120 Cylinder Head
I have an unstamped XK-120 Cylinder head for sale. It has no number stamped inside the valley on the front (where Jag stamped the unique number for each car). It has the valves, cams and cam covers. The casting number of C6733 is the part number for XK-120 heads from April 1952 on. Little corrosion. One tappet guide has slipped upward. Last used in 1972. This is most likely a replacement head, and the shop never re-stamped it. Email me for pics. Best offer.

mark

March 8, 2015 - 11:11
posted by : (adriansawyer@cogeco.ca)
MK2 and MKX Parts

Rebuilt 3.8 engine with matching cylinder head from a 65 MK2. New pistons, all bearings, oil pump. Asking $3500
Overdrive transmission $1000
Doors $250
Bonnet $500
Trunk lid $350
Also have good doors, bonnet and trunk lid and IRS for MKX.
Complete and barely used SS exhaust for MKX $400
Located in Ontario near NY border.
E-mail for details.


March 6, 2015 - 02:23
posted by : (Ckral@ymail.com)
4.0 engine and automatic trans still assembled

have a complete 4.0 engine and transmission for sale, just looking to get it out of my garage, engine and trans are in great condition just removed to do a big block swap for a customer. Please contact at ckral@ymail.com or text call 9134854262
Thank you


March 5, 2015 - 04:17
posted by : (daniell.k@seznam.cz)
Re.: new adjusting cable clamps DAC6133 for Jaguar XJS
Edited on 2015-03-05 4:18:59

Hi found a whole stock of them, so do not hesitate to contact me if you need them...



February 26, 2015 - 06:44
posted by : (mrcrchadd@peoplepc.com)
XK 140/150 TIRE RECESS SCREWS

For sale is a set of 18 1/4 x 28 machine screws for for fastening the tire recess.

Lately it's become more difficult to source these slot head machine screws and Jaguar suppliers are asking close to $ 3.50per fastener.

These screws are 1 inch long, and will have to be trimmed down to proper length before installing-----a nice savings for a bit of trim time!

$ 40.00 free shipping

please email with any questions


February 26, 2015 - 06:35
posted by : (mrcrchadd@peoplepc.com)
DUNLOP# 6 TIRE GAUGE

For sale is a Dunlop tire gauge in its original yellow screwtop tin.

Jaguar never used the #6 in any tool roll, but it is almost identical to the C11753 (without the Jaguar wings) and would be ideal for the driver's tool roll

The gauge is in brand new condition, zero corrosion on the slide gauge or the valve extractor ( blunt end as the C11753)

The fun part is the bright yellow "cigar" tube, which has perfect paint, and completely dent free

35.00 plus shipping
please email with questions


February 26, 2015 - 06:28
posted by : (mrcrchadd@peoplepc.com)
ORIGINAL XK 140/150 JACK FLOOR PLATES


For sale is a pair of floor reinforcing plates for the jack opening

They are unusually rustfree, and primed with catalyzed primer, ready for painting

$ 45.00 plus shipping

please email with any questions

February 25, 2015 - 09:53
posted by : (mrcrchadd@peoplepc.com)
3.8 MK10 TOOL BOX


For sale is a nice original MK10 tool box for the earlier 3.8 cars

The original paint has some scratching on the lid, but is nice overall

The flocking inside the tray is nice, but the foam on the lid, as most could use an easy replacement

$ 40.00 plus shipping

please email with questions

February 24, 2015 - 06:19
posted by : (mrcrchadd@peoplepc.com)
Re.: XK 120/140 TRICO WASHER PUMPS
Edited on 2015-02-25 14:30:39

Edited on 2015-02-25 11:23:46

Edited on 2015-02-24 18:43:18


For sale are Trico vacuum washer pumps in need of rebuilding

A choice of XK 120/140 or XK 150 cores are available. These pumps are deficient in holding vacuum and need a diaphram to regain its pumping action



In addition, for the driven car/owner not concerned with strict authenticity, are Trico bottles for the XK 120/140 roadster cars

original Trico scripted pumps $ 35.00

domestic unscripted bottles $ 35.00

please email with questions


February 20, 2015 - 12:56
posted by : (sfdifferential@gmail.com)
1992-1995 Vandenplas XJ6 NEW FACTORY DIFFERENTIAL RATIO 3.58:1
BEST OFFER FOR THIS ASSEMBLY PLEASE CONTACT ME FOR FURTHER INFORMATION AND/OR PHOTOS.

John David
650-589-7703 bus
415-572-0356 mobile


February 18, 2015 - 08:44
posted by : (mrcrchadd@peoplepc.com)
S1 E TYPE 4.2 ONLY

For sale is the small tommy bar, C20825 for the
S1 E Type 4.2 tool roll

The C20825 is the ONLY correct small tommy bar for this car at 6 3/4 inches long with a squared off tip

$ 45.00 plus shipping

please email with questions


February 18, 2015 - 02:26
posted by : (d8501@aol.com)
Re.: XK-140 headlight pod - passenger side
Edited on 2015-03-08 18:40:28

Edited on 2015-02-18 14:30:12

Carefully removed headlight pod for passenger side front fender (US Car). In primer. Small amount of rust on bottom front was cut out and new metal welded in. Asking $450.00

Mark


February 17, 2015 - 10:25
posted by : (j.chilbert@verizon.net)
Restoration Shop Find * Good Used Jaguar Parts * 50's - 80's

Hello, I have acquired a nice size inventory of Good Used Jaguar Parts 1950's thru 1980's from a restoration shop that has been closed for 15 years. There is very little sheet metal and not much NOS left, but many parts for all model Jaguar cars. I can not access a lot of my smaller items at this time due to storage space challenges.
I don't have everything, but I just might have what you are looking for? If I have it, I always send you pictures of the parts you request.
Located in New Jersey, 20 miles from Philadelphia, PA

*** Please let me know that you are a JCNA member ***

Regards, Joe 609-518-0878