- Parts Wanted Classifieds -
Help - Login
Register

August 7, 2014 - 09:56
posted by : (misterlitho@aol.com)
Member at large from Rochester NY


Hello

Looking for a tinted windshield and/or a tinted rear window for my Mark 2.

Also looking for a set of four splined hubs for my Mark 2 so I can convert to wire wheels. The rears are the same as Mark 1 hubs. The fronts are the same as 3.8S and 420.

I am in Rochester NY. Use this email: bhickey123@aol.com

Thanks Bruce Hickey



August 4, 2014 - 06:59
posted by : (rdjaklitsch@mac.com)
Re.: Wanted - set of 15
Edited on 2014-08-04 19:01:50

Hi - I'm looking for a very good set (4 or 5) of 15" bolt on wire wheels for my 1987 XJ6 VDP.

484-363-1462

Ray.Jaklitsch@icloud.com

The email in my profile is pre-divorce, so use the one above please.

Thank you,

Ray Jaklitsch
1995 4.0L XJS 2+2 Convertible
1987 XJ6 Vanden Plas
1981 Daimler DS420
1958 & 1964

July 17, 2014 - 12:10
posted by : (l.b.michel@virginbox.fr)
XKE/E type S3



I'm looking for a front upper right wishbone.
I do have an available left one re zinc plated with the fulcrum to sell.

Michel
France


July 14, 2014 - 10:00
posted by : (gene.berghoff@gmail.com)
E-type Vent metal clip
I'm looking for a vent metal clip for the AC vent fins for my 73 E-type.

Gene Berghoff, Minnesota

July 6, 2014 - 12:38
posted by : (gt330@comcast.net)
1958 Mark 1 Drum Brake Front Cylinder




I would like to get a Mark 1 Front drum brake cylinder.

I may be able to fix the old one. At the very least I need the smaller,
conical shaped spring that pushes on the front, small piston. It is shown as
number 31 on plate U, page 197 of the 3.4 Litre Spare Parts Catalogues,
and has the Jaguar part number 6086 and Lockheed part number 82484.

The complete front wheel cylinder assembly is Jaguar 6082, Lockheed 82489.

July 5, 2014 - 12:55
posted by : (rossw.lovell@yahoo.com)
XK140 Automatic Transmission Lever Selector
Greetings,

Looking to purchase an XK140 gear selector assembly for the automatic transmission.

Unit is mounted in the center of the dash and appears as a lever that is moved sideways through a plastic bezel with the usual gear positions marked.

I'm guessing someone has to have converted their car from auto to manual.

I'm also guessing that the "usual" scammers will be out in force slamming me with e-mails.

I can be reached most weekends at 860 873 3824, leave a message and I'll call you back. E-mail at your own risk as I've yet to get one legitimate one and it's hard to differentiate.

Looking to purchase as much of the selector assembly as possible.
Thanks, Bob Lovell

July 5, 2014 - 12:55
posted by : (rossw.lovell@yahoo.com)
XK140 Automatic Transmission Lever Selector
Greetings,

Looking to purchase an XK140 gear selector assembly for the automatic transmission.

Unit is mounted in the center of the dash and appears as a lever that is moved sideways through a plastic bezel with the usual gear positions marked.

I'm guessing someone has to have converted their car from auto to manual.

I'm also guessing that the "usual" scammers will be out in force slamming me with e-mails.

I can be reached most weekends at 860 873 3824, leave a message and I'll call you back. E-mail at your own risk as I've yet to get one legitimate one and it's hard to differentiate.

Looking to purchase as much of the selector assembly as possible.
Thanks, Bob Lovell

June 25, 2014 - 04:16
posted by : (bertola@telia.com)
Etype Steering rack
Hello,

I am looking for an LHD steering rack for Etype SIII.


May 6, 2014 - 06:09
posted by : (art.shilov@gmail.com)
XJ headlining wanted


Hi guys,
My friend owns an XJ, 1986 and restores it now

He is trying to find the headlining and it seems to be impossible

Please let me know if you know where to get it

I tried the Martin Robey, first they took the order, but eventually said it would be impossible as their manufacturer had problems with the glue and stopped producing it

Thanks a lot in advance
Art

April 30, 2014 - 01:01
posted by : (jagnfly@gmail.com)
xk 150 automatic accelerator linkage

hello i'm looking for parts from plate 20 xk150 parts book items 7 ) shaft assy. c14191 12) kick down rod c14819 13) kick down rod c14818 14)adjusting nut c14820 15 )rh nut 16 )lh nut 20) control rod c14216 21) lever assy. c14194 22)return spring 310 24)control rod c13816 25)guide c13458 26) spherical seat c13459 [2 req] 27) spring c6925 nn) double coil spring bd.1708/2 32) stop bracket c13630 alternatives from standard trans linkage plate 16 items 7) shaft c14190 13) intermediate lever assembly c14193 good luck let me know what you might dig up on this thanks peter stalker downing orcas island wa 61 xk150 automatic 3.8 fhc


April 27, 2014 - 02:15
posted by : (mike@msdsalesinc.com)
Re.: XKE 3.8L Series I seats
Edited on 2014-04-27 14:17:00

I am looking for an original pair of XKE seats to restore. These are the early style with curved tops. I also need a 2" HD8 SU carburetor for an XKE to rebuild. Lastly; I am looking for an original wood top bow for a Series I XKE. Please feel free to email or call me at 319-721-4356.

Best Regards,

Mike



March 23, 2014 - 08:56
posted by : (richard.k.lebaron@aero.org)
XJ6 S2 connecting rod(s)
I am looking for a connecting rod from a 4.2L series 2 XJ6. If you have a matched set of six that would be fine too. I spun a big end bearing and ruined a rod...

Thanks





March 10, 2014 - 07:49
posted by : (puffdaddymn@gmail.com)
1990 XJS V 12 CYN Owner--convertible
Am seeking:

a nice hood/engine liner for my car (beneath hood);
a nice owners manual-original;
a nice used set of wire wheels; and
nice gently used walnut trim interior-console/glovebox.

THanks, Tom in MN



Thomas Puff--puffdaddymn@gmail.com
(owner of 90 XJS Convertible-5.3 L/12CYN